Table 4-1: Relevant Database Fields For File Import With Header Data; Importing Nc Data - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
4 NC data management

4.1.2 Importing NC data

General
DNC allows users to import NC data (files of all configured NC data types) from
networked or higher-level systems (e.g. from the NC programming system).

Table 4-1: Relevant database fields for file import with header data

Database field
NCDATANAME
DNCDATATYPE
VERSION
NODENAME*
WORKPIECE
RELEASEID
TRIALCUTID
DEVELNAME
DEVELDATE
MODNAME
MODDATE
ADMINNAME
ADMINDATE
LOCKNAME
LOADID
LOADORDER
* NODENAME is not a database field in the DNCDATA table but an auxiliary
function to determine the NODEID from the node name. NODEID is an internal
database field in the NODETABLE and DNCDATA tables. It is used for
assigning NC data to its node.
Note
If the administrative data table is extended on a project-specific basis, the new
database fields can also be used in the header.
Undefined or unassigned fields have the value 0 or a blank string.
FBDN1/4-66
Description
NC data name
NC data type
Version number
Machine, group or path
(e.g. Group1/Machine2)
Workpiece name
Release ID
Trial cut ID
Developer name
Development date
Modified by
Modification date
Administrative data
modified by
Date on which
administrative data was
modified
Lock name
Load ID
Load order
Motion Control Information System DNC (FBDN) - 04/10 Edition
Characters
40 characters; invalid
characters:
&\"`´*+,/:;<=>?[]\|!,(){}%$ߧµ³
3 characters; only types defined
in the DNCDATATYPE table.
Long integer
40 characters
40 characters
Value range 0..1 (1 = released)
Value range 0..1 (1 = trial cut ID)
32 characters
Date
32 characters
Date
32 characters
Date
32 characters
Long integer
Long integer
© Siemens AG 2010 All Rights Reserved
05.07