Setting The Time And Date - Siemens SINUMERIK 840D sl Commissioning Manual

3080249
3080250
3080251
3080252
3080253
3080254
//* Name of channel area 8 and names of channels of channel area 8 */
3080255
3080256
3080257
3080258
3080259
3080260
3080261
3080262
3080263
You can enter your own user texts in the blank strings (s.a. ""), e.g. "NCU_1". 8 characters
are possible per softkey bar; the carriage return is created with characters "%n": e.g.,
"NC3Turn%nChann1".
2.5

Setting the time and date

The following options are available:
● Setting the date and time of the PLC manually.
● To synchronize the date and time of the PLC and HMI-Embedded.
Procedure
1. In the "Commissioning" operating area press the "PLC" → "Date/Time" softkeys.
2. Press the "Accept" softkey to transfer the date and time of HMI-Embedded to the PLC.
3. Press softkey "Synchronous AUTO/ON" or "Synchronous AUTO/OFF" to
4. If you have not set automatic synchronization, you can synchronize the time immediately
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
""
""
""
""
""
""
""
""
""
""
""
""
""
""
""
The date (weekday, date, year) and time are displayed in the "Current" window area of
HMI-Embedded and the PLC.
Enter the following new date in the window area "new":
– Date: Day, Month, Year
– Time of day: Hour, Min., Sec.
– Synchronization time (0-99 minutes), 10 minutes is the default setting.
activate/deactivate the cyclic synchronization time.
with softkey "Synchronous manual". The new data are displayed in the output field
"current".
/2x9 T_CHAN_AREA_7_CHANNEL_3
/2x9 T_CHAN_AREA_7_CHANNEL_4
/2x9 T_CHAN_AREA_7_CHANNEL_5
/2x9 T_CHAN_AREA_7_CHANNEL_6
/2x9 T_CHAN_AREA_7_CHANNEL_7
/2x9 T_CHAN_AREA_7_CHANNEL_8
/2x9 T_CHAN_AREA_8
/2x9 T_CHAN_AREA_8CHANNEL_1
/2x9 T_CHAN_AREA_8CHANNEL_2
/2x9 T_CHAN_AREA_8CHANNEL_3
/2x9 T_CHAN_AREA_8CHANNEL_4
/2x9 T_CHAN_AREA_8CHANNEL_5
/2x9 T_CHAN_AREA_8CHANNEL_6
/2x9 T_CHAN_AREA_8CHANNEL_7
/2x9 T_CHAN_AREA_8CHANNEL_8
Configuring the HMI system
2.5 Setting the time and date
29