Configuring the NCU
2.1
SINUMERIK NCU
2.1.1
Structure of SINUMERIK NCU
Subcomponents of the NCU
A SINUMERIK NCU always comprises the following integrated subcomponents:
● PLC
● NCK
● CP
● HMI (SINUMERIK Operate)
● SINAMICS Integrated (DRIVE)
These subcomponents are also automatically created when you insert the NCU.
Additional connectable components
Optionally, the following components can be connected to the NCU:
● NX10.3 and NX15.3 modules
These components are not inserted automatically when inserting an NCU, but must be
integrated manually (Page 21).
2.1.2
Insert NCU
Procedure
In order to insert a SINUMERIK NCU via the portal view into the project, proceed as follows:
1. Go to the portal view and select "Devices and Networks".
2. Click "Add new device".
3. Click the "Controller" button.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
2
17