Global Machine Status Display - Siemens SINUMERIK 840Di sl Operating Manual

2
01/2008

2.4.2 Global machine status display

1 Operating areas
2 Channel status
3 Channel operational
messages
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
11 Working windows, NC displays
The working windows (program editor) and NC displays (feedrate,
tool) available in the selected operating area are displayed here.
The unit for positional data is preceded by the diameter symbol ∅
in the work pane if the axis is currently the transverse axis and if
the tool coordinate system is set. If diameter programming is
disabled with DIAMOF, the symbol preceding the unit is no longer
visible.
12 User response line with user information
Here user information is displayed for the selected function (if
available).
13 Focus
The selected pane is highlighted by a frame. The window header
display is inverted. Data entered on the operator panel front apply
to this window.
16 Recall function, i.e., key ^ is active
17 ETC. function, i.e., > key is active
18 Horizontal softkeys
19 Vertical softkeys
The softkey functions available in the selected operating area are
displayed in the horizontal/vertical softkey bar (corresponding to F1
to F8 on the full keyboard).
Additional information
The screen layout may differ slightly from the layout displayed above,
depending on the screen size or resolution used.
The currently selected operating area is displayed (Machine,
Parameters, Program, Services, Diagnostics, Commissioning).
The current channel status is displayed
- Channel reset
- Channel interrupted
- Channel active
For displaying the channel operational messages with symbols:
Operator Components/Operating Sequences
2.4 Screen layout
2
2-43