03/2012
3.4.21 Trigger on unsuccessful diagnostic action
In order to automatically monitor malfunctions of the diagnostic actions, the trigger
on "Unsuccessful diagnostic action" can be set up.
Fig. 3-51: Trigger on unsuccessful diagnostic action
Function
Name
Action
Delete
OK
Cancel
3.4.22 Trigger on start of data acquisition
This trigger can be used to specifically monitor that the PC on which the ePS client
is installed, is running and can acquire data for the ePS server. This is irrespective
of whether there is communication to the server. The data is buffered on the client
PC.
Fig. 3-52: Trigger on start of data acquisition
Function
Name
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Name of the trigger; can be entered by the user.
Selection of all diagnostic actions.
Deletes the trigger from the control monitor.
Saves the set trigger.
Rejects the trigger selection and returns to the
control monitor.
Description
No function
Permanently assigned
Copies the trigger to the clipboard.
Deletes the trigger from the control monitor.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 100
characters,
all characters
are permissi-
ble)
DISPLAY
SELECTION
ACTION
ACTION
ACTION
Type
ACTION
ACTION
3-167