Programming technological functions (cycles)
10.7 Additional cycles and functions in ShopMill
10.7.4
Scaling
You can specify a scale factor for the active machining plane as well as for the tool axis. The
programmed coordinates are then multiplied by this factor.
New scaling
Parameter
Scaling
XY
Z
10.7.5
Mirroring
Furthermore, you can mirror all axes. Enter the axis to be mirrored.
Note
Travel direction of the milling cutter
Note that with mirroring, the travel direction of the cutting tool (conventional/climb) is also
mirrored.
602
Description
● New
New scaling
● Additive
Additive scaling
Scale factor XY
Scale factor Z
Additive scaling
Operating Manual, 05/2017, A5E40868956
Unit
Milling