Call Work Offsets - Siemens SINUMERIK Series Operating Manual

Creating a ShopMill program

9.10 Call work offsets

9.10 Call work offsets
You can call work offsets (G54, etc.) from any program.
You define work offsets in work offset lists. You can also view the coordinates of the selected
offset here.
Procedure
338
1. Press the "Various", "Transformations" and "Work offset" softkeys.
The "Work offset" window opens.
2. Select the desired work offset (e.g. G54).
3. Press the "Accept" softkey.
The work offset is transferred into the work plan.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling