Transferring Individual Files From The Control To The Project - Siemens SINUMERIK 840D sl Operating Manual

6.2.15

Transferring individual files from the control to the project

Single or multiple files in the connected control are transferred to the project with this function.
Note
All files with an activated checkbox are transferred to the project.
Note
Note the central security information in Section Auto-Hotspot.
Operating sequence
1. Connect yourself to a control.
2. Open a project.
Figure 6-36 AMM with project dialog (ONLINE)
3. In the lower window of the project dialog, all files are displayed that are on the control.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Operator control (software)
6.2 Project
119