Monitoring Data - Siemens SINUMERIK 840D sl Operating Manual

Parameter
Cutting tip length
Cutting tip width
Type 110 - ball end mill for cylindrical die-sinking cutter, type 111 - ball end mill for tapered die-sinking cutter, type 120 - end
mill, type 121 - end mill with corner rounding, type 130 - angle head cutter, type 140 - facing tool, type 150 - side mill, type
155 - bevel cutter, type 156 - bevel cutter with corner rounding and type 157 - tapered die-sinking cutter
N
For driven tools (drills and milling tools)
Direction of
spindle rotation
Cutting edge OEM
parameters 1 - 2
13.9.4

Monitoring data

The "Tool Details" window provides the following data on the selected tool when the "Monitoring
data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Monitoring type
Milling
Operating Manual, 05/2017, A5E40868956
Software option
In order to be able to manage the parameter spindle direction of rotation, coolant
and tool-specific functions (M1-M4), you require the "ShopMill/ShopTurn" op‐
tion.
Meaning
The magazine number is specified first, followed by the location number in the magazine. If
there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name as text
or number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
T - tool life
C - count
W - wear
The wear monitoring is configured via machine data.
Please note the specifications of the machine manufacturer.
Meaning
For displaying the tools during the simulation of the program execu‐
tion.
Width of the plunge cutter
Number of teeth
Spindle is not switched on
CW spindle rotation
CCW spindle rotation
Coolant 1 and 2 (e.g. internal and external cooling) can be switched
on and off.
Please refer to the machine manufacturer's specifications
Tool management
13.9 Tool details
663