Customizing the "Machine" operating area
10.5 Activating block search mode
16 = 0
17 = 0
18 = 0
19 = 0
22 = 0
23 = 0
32 = 0
45 = 0
10.5
Activating block search mode
The display is activated via a general configuration machine data item and the user interface
used for the selection from the available search variants.
Settings
MD51028 $MNS_BLOCK_SEARCH_MODE_MASK
Bit 0 = 1
Bit 1 = 1
Bit 4 = 1
10.6
Activating the program test
There are several control functions to test and run in a part program that are activated in the
"Program Test" control window. The window is displayed in the "Machine" operating area in
the "Program Control" window.
Configuring the program test
The window is activated via a general configuration machine data item.
MD51039 $MNS_PROGRAM_CONTROL_MODE_MASK:
Bit 0 = 1
68
; Waiting for other channel
; Waiting for feedrate override
; Error in NC block
; Waiting for external NC blocks
; Spindle enable missing
; Axis feedrate override
; Oscillation active
; Search target found
activates block search with calculation, without approach (default setting)
activates block search with calculation, with approach (default setting)
activates block search without calculation (default setting)
window is displayed
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)