Installation; System Requirements And Installation - Siemens sinumerik 840d sl Configuration Manual

Installation

2.1

System requirements and installation

SINUMERIK Integrate Create MyHMI /WinCC V13.x represents an add-on package for
SIMATIC WinCC Advanced V13 (TIA Portal) with additional setup.
System requirements
All hardware and software requirements for installing SIMATIC WinCC Advanced V13 apply.
(See readme file for SIMATIC WinCC Advanced V13.x)
Requirement
● All other applications (e.g. Microsoft Word and TIA Portal) are closed.
● SIMATIC WinCC Advanced V13.x is installed on the PG/PC.
Procedure
To install SINUMERIK Integrate Create MyHMI /WinCC V13.x, follow these steps:
1. In Windows Explorer, browse to the root directory of the product DVD.
2. Double-click the setup file "Start.exe" from SINUMERIK Integrate Create MyHMI /WinCC
V13.
3. Install the software using the installation wizard.
Result
SINUMERIK Integrate Create MyHMI /WinCC is installed on the PG/PC.
If you expand SINUMERIK Operate with an operating area on a PC system (PCU 50.5) via
the WinCC RT Advanced, you must install Runtime WinCC RT Advanced as well as
SINUMERIK Integrate Create MyHMI /WinCC (Page 26) on it.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
2
25