User-Specific Tree View - Siemens Sinumerik 840D sl Function Manual

05.07

3.3 User-specific tree view

To display all of the other machines that the logged-on user is permitted to view,
choose Tools  Display All My Machines.
In the case of users who do not have an explicit machine assignment, all of the
machines in the DNC system are displayed.
In the case of users to whom at least one machine has been assigned via the
explicit assignment, all the machines assigned are displayed for this user and not
just the machines that the user is permitted to view on the station he is logged on
to.
See also: Section 5.2.4 "Machine list for a user"
Example
Secondary condition:

The plant contains machines 1 - 12.

No machines have been assigned explicitly to user dnc1 via User
Administration.

User dnc2 has been assigned the following machines:
Machine 1
Machine 2
Machine 3
Machine 4
Machine 5
Machine 6

Station 0815 has been permanently assigned the following machines:
Machine 1
Machine 2
Machine 3
Machine 8
Machine 9
Standard tree view
After logging onto station 0815, user dnc2 can see the following machines:

Machine 1

Machine 2

Machine 3
This is the intersecting set from the explicit assignment for user dnc2 and the
machines assigned to the station.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
3 Operator interface
FBDN1/3-51