Trochoidal Milling - Siemens SINUMERIK 828D Manual

CNC technology cycles
13.2 Highlights of machining cycles
13.2.3

Trochoidal milling

Vortex milling (trochoidal milling) of open slots is available as a milling strategy directly on
the controller, i.e. NC programs for path motions do not have to be generated by CAM
systems as previously.
It is the preferred strategy for HSC roughing, the tool is never fully inserted and tool paths
are smooth and round
Simple parameterizing per dialog: Roughing, pre-finishing, finish milling, finishing floor
and edge
You can select as milling direction synchronous operation, reverse rotation, and for
maximum cutting volume during roughing the combination reverse rotation and
synchronous operation
Benefits
Innovative CAM function now available directly on the controller
Reduction in the machining time for slot milling by up to 50%
84
SINUMERIK 828D
BASIC
Basic configuration
SINUMERIK 840D sl
BASIC
Basic configuration
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
SINUMERIK 828D
Basic configuration
SINUMERIK 840D sl
Basic configuration
SINUMERIK 828D
ADVANCED
Basic configuration
SINUMERIK Operate - Milling