Save Information - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
18.6 Machine identity
Procedure
Note
Effectiveness of the selection file
A file selection (e.g. oem.xml) only becomes effective if you have still not saved any files in
this area (e.g. manufacturer). Use the "Import data" softkey to make a new selection. You
can then select a different address. The selection list disappears again when you save. You
also have the option to delete all of the fields of the area that have been filled, and confirm
this using the "OK" softkey.
See also
Creating a selection file (Page 329)
18.6.4

Save information

All the machine-specific information of the control is combined in a configuration via the user
interface. You can save machine-specific information on the drives that have been set-up.
332
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
It takes some time to call the version display. The progress of the data
determination is displayed in the dialog line.
3 Press the "Logbook" and "Change" softkeys.
4. Press the "Import data" softkey.
The "Read-in Selection Files: Select File(s)" window opens.
5. Select the appropriate drive and the required file(s).
6. Press the "OK" softkey.
The file is automatically copied to the correct location in the system.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)