Overview Of The Program Data - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data

Overview of the program data
An overview of the plant or system configuration is emulated in the "DNC" window.
Note
You can individually configure the sequence and selection of the columns to be displayed on
the DNC server.
The system structure together with the directories is displayed in the left-hand window area.
The contents of the directories are displayed in the right-hand window area.
Manage file system
The following functions are available for you to manage data:
● Switching filter on/off (Page 11)
● Transferring NC programs between the source and target.
● Selecting, copying, inserting directories.
● Updating the directory structure.
● Sorting NC programs.
● Displaying the program content in the preview window.
MCIS DNC - Direct Numerical Control
Siemens Automation Parts
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
Column Meaning
Name Name of folders, NC programs, workpieces, NC packages
Type File/program type
Version Version identifier
Release ID Released NC program with version number
Trial cut ID Trial cut ID - the program is only enabled for trial machining
Length Length of the NC program in bytes
Modification date Time of change
Archive Designation of the NC archive
Workpiece Designates a group of NC programs to be used for machining a workpiece,
See reference: Function Manual NC Program Management DNC Machine
See chapter: Managing program data (Page 27)
See Chapter: Managing program data (Page 27)
See Chapter: Sorting NC programs (Page 12)
See Chapter: Preview (Page 14)
2
9