Tips & Tricks - Siemens SINUMERIK 840D sl Commissioning Manual

Tips & tricks
The tools (*.usz files) on the USB flash drive are not listed/started:
● Reformat the USB flash drive and repeat the procedure.
If necessary, use another USB flash drive and repeat the procedure.
An unexpected behavior/event, error messages appear during the processing of the tool.
● Evaluate the LOG file (*.htm).
● Contact the hotline or the creator of the tool. Keep the LOG file ready.
SINUMERIK Software Update Tool
Commissioning Manual, 03/2018, A5E42187770B AA
6
35