Measuring The Workpiece Parallel To The Axis - Siemens SINUMERIK 840D sl Programming Manual

General
1.12 Overview of measuring cycle functions for milling technology
1.12.4

Measuring the workpiece parallel to the axis

The following measuring variants are provided for the paraxial measurement of a hole, shaft,
groove, web, or rectangle. They are executed by cycle CYCLE977.
Workpiece measurement: Measure hole
Result:
● Actual dimension, deviation: Diameter, center point
● Deviation: Tool offset of the zero offset
Workpiece measurement: Measuring a shaft
Result:
● Actual dimension, deviation: Diameter, center point
● Deviation: Tool offset of the zero offset
48
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles