Grooving Residual Material (Cycle952) - Siemens SINUMERIK 840D sl Operating Manual

Parameter Description
Set machining area Set machining area limits
limits
N Number of grooves
10.5.10

Grooving residual material (CYCLE952)

Function
The "Grooving residual material" function is used when you want to machine the material that
remained after grooving along the contour.
For a G code program, first select the "Grooving residual material" function. Material that
remains as part of the finishing allowance is not residual material. The "Grooving residual
material" function allows you to remove unwanted material with a suitable tool.
The "Grooving residual material" function is a software option.
Procedure
Milling
Operating Manual, 05/2017, A5E40868956
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Turning" and "Contour turning" softkeys.
3. Press the "Grooving residual material" softkey.
The "Grooving residual material" input window is opened.
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Value
No
1
Can be set in SD
559