Excluding Devices From The Export - Siemens SINUMERIK 840D sl Operating Manual

Configuring with EPLAN Add-In

5.6 Excluding devices from the export

5. A progress bar displays the currently performed operations.
6. After completing the export, a dialog displays the results of the export.
Figure 5-19
7. The "Open log file" button opens the log of the export operation.
8. You can correct any listed errors or warnings.
You will find further information on this in Section Messages (Page 43).
Note
"Without DO list" / "With DO list" options
With the "Without DO list" export, the DO assignment must be performed in Create MyConfig.
For this purpose, the DO list can also be read in separately in Create MyConfig Topo in addition
to the "*.sdx".
If the "With DO list" option is used for the export, the DO list must be under the set path and
must be valid. The DO list is then imported into Create MyConfig Topo.
5.6 Excluding devices from the export
Certain devices can be excluded from the export based on their display type.
34
Export results
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA