Preview; Search Function - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data

2.3 Preview

2.3 Preview
You have the option of displaying a preview of the program content.
Procedure
See also
Overview of the program data (Page 9)
2.4

Search function

You have the option for searching for specific entries using the search function. The search
function is a partial text search and is executed across all columns.
Procedure
14
1. Place the cursor on the desired program.
2. Press the ">>" softkey.
Additional softkeys are displayed on the vertical bar.
3. Press the "Preview window" softkey.
The "Preview" area is displayed in the lower window together with the
file content.
4. Press the "Preview window" softkey again to close the window area.
1. Press the "Search" softkey.
The "Search for" window appears.
2. Enter the term that you're looking for in the "Search text" entry field.
• The text can be up to 256 characters long.
• Use the asterisk ("*") as wildcard for any character string.
• Use the question mark ("?") as wildcard for one character.
• Activate the check box "same word", to search precisely for this term
that has been entered.
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0