Commissioning Of Third-Party Motor And Additional Second Encoder Via Smc - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
8.5.2.2

Commissioning of third-party motor and additional second encoder via SMC

Introduction
In our example a power section is to be configured with third-party motor and encoder. You
have selected the menu "Commissioning > Drive systems > Drives". You are in the following
menu:
Figure 8-39
88
Menu "Drives > Configuration" (external motor)
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive