Activate Oblique Angle Transformation With Fixed Angle (Traang) - Siemens SINUMERIK 840DE sl Function Manual

<α>:
<n>:
Note
Oblique angle transformation TRAANG active in the channel is deactivated using:
● Deactivate transformation: TRAFOOF
● Activation of another transformation: E.g. TRACYL, TRANSMIT, TRAORI
Example
Program code
N20 TRAANG(45)
2.3.3.2

Activate oblique angle transformation with fixed angle (TRAANG)

The oblique angle transformation (TRAANG) with a fixed angle (TRAANG) is activated in the
part program or synchronized action using the TRAANG statement. When activated, it is not
permissible that an angle is specified. The angle parameterized in the machine data of the
particular TRAANG data set is active.
Syntax
TRAANG
TRAANG()
TRAANG(, <n>)
Meaning
TRAANG:
TRAANG():
TRAANG(, <n>):
<n>:
Transformations
Function Manual, 06/2019, A5E47435470B AA
2.3 Oblique angle transformation (inclined axis) TRAANG (option)
Angle of the inclined axis (optional)
Range of values:
The initial state parameterized in the machine data is effective if an
angle is not specified:
MD2xxxx $MC_TRAANG_ANGLE_<n>
TRAANG data set number (optional)
Range of values:
Comment
; Activate TRAANG with the first TRAANG data set and angle 45°
Activate TRAANG with the first TRAANG data set and angle <α> from
machine data MD24700 $MC_TRAANG_ANGLE_1
Activate TRAANG with <n>th TRAANG data set and angle <α> from
machine data MD2xxxx $MC_TRAANG_ANGLE_<n>
TRAANG data set number (optional)
Range of values:
M1: Kinematics transformation
-90° < α < + 90°
1, 2
1, 2
73