Variables; D.3 Variables - Siemens Sinumerik 840D sl Programming Manual

Data lists

D.3 Variables

D.3

Variables

Identifier Type
$C_A REAL
$C_B REAL
.... ....
$C_G INT
$C_H REAL
$C_I[ ] REAL
$C_I_ORDER[ ] REAL
$C_J[ ] REAL
$C_J_ORDER[ ] REAL
$C_K[ ] REAL
$C_K_ORDER[ ] REAL
$C_L INT
$C_M REAL
$C_P INT
$C_Q REAL
.... ....
$C_Z INT
$C_TS STRING
$C_A_PROG INT
$C_B_PROG INT
.... ....
$C_G_PROG INT
$C_Z_PROG INT
$C_TS_PROG INT
$C_ALL_PROG INT
184
Description
Value of programmed address A in the ISO dialect mode for cycle programming
Value of programmed address B in the ISO-dialect-mode for cycle programming
.....
G number for cycle calls in the external mode
Value of programmed address H in the ISO dialect mode for cycle programming
Value of the programmed Address I in the ISO-dialect-mode for cycle programming and
macro technology with G65/G66. A max. of 10 entries is possible in the block for the
macro programming. The values remain in the programmed sequence in the array.
For description, refer to $C_I[ ], defines the programming sequence
For description refer to $C_I[ ]
For description, refer to $C_I[ ], defines the programming sequence
For description refer to $C_I[ ]
For description, refer to $C_I[ ], defines the programming sequence
Value of programmed address L in the ISO- dialect-mode for cycle programming
Value of programmed address M in the ISO-dialect-mode for cycle programming
Value of programmed address P in the ISO-dialect-mode for cycle programming
Value of programmed address Q in the ISO-dialect-mode for cycle programming
....
Value of programmed address Z in the ISO-dialect-mode for cycle programming
String of tool identifier programmed under the address T
Address A is programmed in a block with cycle call
0 = Not programmed
1 = Programmed (absolute)
3 = Programmed (incremental)
Address B is programmed in a block with cycle call
0 = Not programmed
1 = Programmed (absolute)
3 = Programmed (incremental)
....
Shell cycle is programmed over a G function
Address Z is programmed in a block with cycle call
0 = Not programmed
1 = Programmed (absolute)
3 = Programmed (incremental)
A tool identifier was programmed under Address T
TRUE = programmed; FALSE = not programmed
Bit pattern of all programmed addresses in a block with cycle call
Bit 0 = Address A
Bit 25 = Address Z
Bit = 1 address is programmed
Bit = 0 address is not programmed
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
ISO Milling