Execution From External Storage Devices - Siemens SINUMERIK 828D Manual

8.3

Execution from external storage devices

You can select, edit and execute part programs directly on the CF card, USB stick, hard disk
or via the network.
The "Execution from external storage (EES)" option provides the following advantages over
the basic configuration:
Uniform syntax for the subprogram call, independent of the storage location of the
subprogram. This reduces syntax errors for the subprogram call.
Part programs can be edited without NC reset.
The size of the memory available on the machine can be expanded economically with
external media. The size of the part programs is limited only by the capacity of the
external data storage.
Benefit
Quick and easy access to part programs on external storage media
SINUMERIK Operate - Milling
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
SINUMERIK 828D
BASIC
Basic configuration
SINUMERIK 840D sl
BASIC
Basic configuration
SINUMERIK 828D
BASIC
Option: P75
SINUMERIK 840D sl
BASIC
Option: P75
CNC operation in automatic mode (AUTO)
8.3 Execution from external storage devices
SINUMERIK 828D
Basic configuration
SINUMERIK 840D sl
Basic configuration
SINUMERIK 828D
Option: P75
SINUMERIK 840D sl
Option: P75
SINUMERIK 828D
ADVANCED
Basic configuration
SINUMERIK 828D
ADVANCED
Option: P75
51