DNC Plant/DNC Cell (FBDN1)
4 NC data management
4.6.2 File system
The file system reflects the plant configuration:
The DNC configuration elements "group", "machine", "link" and "workpiece" are
stored in the file system as directories, while the NC data is stored as files. The
directory structure of the file system is similar to the tree structure on the left of the
interface.
Fig. 4-21: Tree structure of operator interface
Table 4-8: Standard icons in the directory
ROOT
Group/subgroup
Link
Machine with DVK transmission
module ("SINUMERIK 840D")
Machine (transfer serial without
protocol)
Machine with "SINUMERIK*"
transmission module
NC package*
* Only available in conjunction with Siemens PLM Teamcenter
FBDN1/4-104
Network file systems
Workpiece
NC file
NC file with comment (similar to:
SPF, etc.)
NC file with attachment
Tool setting device
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07