Axis/Spindlespecific Machine Data - Siemens SINUMERIK 840D sl Function Manual

W1: Tool offset
2.19 Data lists
Number Identifier: $MC_
20182 TOCARR_ROT_ANGLE_OFFSET[i]
20184 TOCARR_BASE_FRAME_NUMBER
20188 TOCARR_FINE_LIM_LIN
20190 TOCARR_FINE_LIM_ROT
20202 WAB_MAXNUM_DUMMY_BLOCKS
20204 WAB_CLEARANCE_TOLERANCE
20210 CUTCOM_CORNER_LIMIT
20220 CUTCOM_MAX_DISC
20230 CUTCOM_CURVE_INSERT_LIMIT
20240 CUTCOM_MAXNUM_CHECK_BLOCKS
20250 CUTCOM_MAXNUM_DUMMY_BLOCKS
20252 CUTCOM_MAXNUM_SUPPR_BLOCKS
20256 CUTCOM_INTERS_POLY_ENABLE
20270 CUTTING_EDGE_DEFAULT
20272 SUMCORR_DEFAULT
20360 TOOL_PARAMETER_DEF_MASK
20390 TOOL_TEMP_COMP_ON
20392 TOOL_TEMP_COMP_LIMIT
20610 ADD_MOVE_ACCEL_RESERVE
21080 CUTCOM_PARALLEL_ORI_LIMIT
22530 TOCARR_CHANGE_M_CODE
22550 TOOL_CHANGE_MODE
22560 TOOL_CHANGE_M_CODE
22562 TOOL_CHANGE_ERROR_MODE
24558 TRAFO5_JOINT_OFFSET_PART_1
24658 TRAFO5_JOINT_OFFSET_PART_2
28085 MM_LINK_TOA_UNIT
2.19.1.3

Axis/spindlespecific machine data

Number Identifier: $MA_
32750 TEMP_COMP_TYPE
234
Description
Rotary axis offset of tool carrier with orientation capa‐
bility
Number of the basic frames to accept the table offset
Limit linear fine offset TCARR
Limit of the rotary fine offset TCARR
Maximum number of blocks with no traversing motions
with SAR
Direction reversal for WAB
Max. angle for intersection calculation with tool radius
compensation
Maximum value for DISC
Maximum value for intersection calculation with TRC
Blocks for predictive contour calculation with tool radius
compensation
Maximum number of blocks without traversing motion
for TRC
Maximum number of blocks with compensation sup‐
pression
Intersection process possible for polynomials
Basic setting of tool cutting edge without programming
Initial setting of additive offset without program
Definition of tool parameters
Activation of temperature compensation for tool length
Maximum temperature compensation for tool length
Acceleration reserve for overlaid movements
Minimum angle (path tangent and tool orientation) for
3D tool radius compensation
M code for change of tool carrier
New tool offsets with M function
M function for tool change
Response when errors occur at tool change
Vector of kinematic offset in table, transformation 1
Vector of kinematic offset in table, transformation 2
Assigning ´the TO unit to a channel (SRAM)
Description
Temperature compensation type
Function Manual, 06/2019, A5E47435126B AA
Tools