Using Interactive Or Silent Installation Versions - Siemens SINUMERIK 840D sl Commissioning Manual

SINUMERIK Operate on PC/PCU

24.2 Using interactive or silent installation versions

mytext_<lng>.ts
</context>
</TS>
<lng> stands for the language code.
24.2 Using interactive or silent installation versions
General Information
If you install SINUMERIK Operate using PC/PCU, then the execution is realized using an
MSI setup. The following installation versions are available, which you can use in the
interactive or silent mode using the appropriate Windows command line:
● SINUMERIK Operate complete installation
● SINUMERIK Operate base installation with auxiliary files
● SINUMERIK Operate base installation without auxiliary files
Execution
You control setup execution using command line arguments. The interactive mode
you to transfer parameter strings to setup.exe. If you wish to run setup without user
interaction, then you can extend the parameter string with the silent mode
Place the parameter string in inverted commas. If you use several parameters in the string,
separate these using spaces.
If you do not specify any arguments when calling setup.exe, then the complete installation is
run in the interactive mode.
Note
Do not put any spaces between
Note
If you want a progress display in the silent mode, then instead of specifying
specify
590
<source>MY_AREA</source>
<translation>Text, which is displayed on the softkey</translation>
<remark>Remark (optional)</remark>
<chars>20</chars>
<lines>2</lines>
</message>
.
/qb!
and the parameter string.
/v
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
allows
/v
.
/qn
you can also
/qn
SINUMERIK Operate (IM9)