Screen Saver - Siemens SINUMERIK 840D sl Manual

Display
Note
Pixel error according to DIN EN ISO 9241-307, Error class II.
3.3

Screen saver

If a screen with high contrast is displayed unchanged for longer than an hour, then the
screensaver must be activated in order to protect the TFT display against so-called "burning
in" of the last displayed screen.
The time can be adapted individually. Further information can be found at:
Commissioning of Basic Software and Operating Software, SINUMERIK Operate (IM9)
Operator panel front: OP 012
Manual, 09/2016, A5E36371591B
Key Function corresponds to the
PC key function
Page down
Cursor up
Cursor left
Cursor right
Cursor down
5 (in numeric key group)
<Shift> F9
Operator control and display elements
Key Function corresponds to the
PC key function
Delete
Insert
Enter
F9
F10
A, ..., Z <Shift> A, ..., Z
<Shift> F10
3.3 Screen saver
93