2.7.2.2
Selecting a tool
Procedure
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Enter the name or the number of the tool T in the input field.
- OR -
Press the "Tool" softkey to open the tool list, position the cursor on the
desired tool and press the "To Manual" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the
field of tool parameter "T".
4.
Select tool edge D or enter the number directly in field "D".
5.
Press the "CYCLE START" key.
The tool is loaded into the spindle.
Setting up the machine
2.7 Manual mode
61