Expanded Functions For Plc Keys - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005
In general, the syntax of an assignment line is:
PCi = display name, file
i
Screen name
File
Example:
[PLC_SELECT]
PC1= CYC82, drilling.com
PC2= CYCLE90, millthre.com
PC3=..., etc.

5.4 Expanded functions for PLC keys

Changes of task and state can also be configured for PLC keys. The number range
for the action lies
between 0 – 17
>= 100
The PLC-specific keys are numbered from 50 - 254.
(50-81 are reserved for OEM applications)
Examples
Same example as in Subsection 5.1.2 Assigning functions to keys
[KeyConfiguration]
HK50.0 = Action:=100
The configuration shown here does not execute a change of task or state and
therefore remains in the current task and screen. An Action 100 is forwarded.
A change of task and state could be configured here in exactly the same way.
HK50.0 = Task:=1, State:=10, Action:=100
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Number of the display in the interface
Display (screen form) identifier
File in which the display is configured
for standard applications
for Expand user interface applications.
Expanding the Operator Interface (BE1)
5 Configuring OP Hotkeys and PLC Keys
;Comment
;Fixed section introduction
;assignment line
BE1/5-133