Control Elements Of The Diagrams For Individual Measurements - Siemens SINUMERIK Series Function Manual

03/2012

2.2.3 Control elements of the diagrams for individual measurements

Fig. 2-23: Header line for individual measurement diagram
Selecting the characteristic
The drop-down list box contains the list of characteristics that are available for each
type of test. If you click a name of the characteristic, then the characteristic that has
been displayed up until this point is replaced by the new one.
New characteristic in a separate diagram
If you click the "Display in new diagram" button on the right-hand side next to the
drop-down list box of characteristics, a new diagram of the same type will be dis-
played below the diagram that is already shown.
The new diagram adopts all of the display characteristics of the original diagram
(markings, zoom, etc.), with the exception of the scale. The scale of a cloned dia-
gram is always Auto/Auto.
Where individual measurement diagrams are concerned, the "Actions" menu and
context menu have the same options:
Function
Parameters
General conditions
Comment
Scaling
Scaling for the equability test
Fig. 2-24: Scaling for the equability test
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
2.2 Variable monitors – time series – measurements and measurement series
Description
Shows the pop-up window with the list of measurement
parameters. The same pop-up window can be opened
from the context of the time series.
Shows the pop-up window with the list of measurement
parameters.
Pop-up with measurement comment.
Setting for the diagram scale (for the equability test on-
ly). In the case of the diagrams for the circularity test and
universal axis test, the "Actions" menu does not contain
"Scaling".
2 Machine Information
2-45