Exporting Db2 Alarms (Ts Files) - Siemens sinumerik 840d sl Configuration Manual

7.3.4

Exporting DB2 alarms (TS files)

This chapter describes how you export the DB2 alarms using the user interface of
SINUMERIK Operate.
Alternatively, you can also copy the files over Windows Explorer. The DB2 alarms are saved
at the following location when SINUMERIK Operate is installed on a PC system:
● C:\Program Files (x86)\Siemens\MotionControl\oem\Sinumerik\hmi\lng\
Precondition
● A USB flash drive is inserted at a PC system with SINUMERIK Operate.
● In SINUMERIK Operate, the USB port is activated under "Commissioning > HMI > Log.
Drive."
Procedure
To copy TS files from SINUMERIK Operate, proceed as follows:
1. In SINUMERIK Operate select the screen "Commissioning > System data" – and in the
folder structure, navigate in the "HMI data/Texts/Manufacturer/" directory.
2. Select the required TS files and actuate the "Copy" softkey".
3. Select the directory structure of your USB flash drive and press the "Paste" softkey.
Result
The DB2 alarms were copied from SINUMERIK Operate as TS files.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring alarms
7.3 Configuring DB2 alarms
99