Changing The Address Display; Enlarging/Reducing The Ladder Diagram - Siemens SINUMERIK Series Operating Manual

Edit PLC user program (828D only)
23.5 View of the program blocks
No signal flow
No network executed
STOP operating state
Procedure
23.5.5

Changing the address display

You can choose between specification in absolute or symbolic address.
Elements for which there are no symbolic identifiers are automatically displayed with absolute
identifiers.
Procedure
23.5.6

Enlarging/reducing the ladder diagram

You can enlarge or reduce the representation of the ladder diagram.
910
1. The program block view is open.
2. Press the "Program stat." softkey to display the program status display
in the status display.
3. Press the "Program stat." softkey again to hide the program status display
in the status display again.
1. The program block view is open.
2. Press the "Symbol. address" softkey.
The list of operands is displayed sorted according to symbolic address.
3. To return to the display showing the absolute addresses press the "Sym‐
bol. address" softkey again.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Gray
Gray
Gray
Milling