Additional Safety Information & Instructions And Residual Risks For Safety Integrated - Siemens Sinumerik 840D sl Function Manual

Sinumerik safety integrated

Hide thumbs Also See for Sinumerik 840D sl:

Table of Contents

Additional safety information & instructions and residual risks

for Safety Integrated

Safety Integrated can be used to minimize the level of risk associated with

machines and plants.

Safe operation of the machine or plant with Safety Integrated is however only

possible if the machine manufacturer

-- is familiar with and observes every aspect of this technical user documentation,

including the documented general conditions, safety information, and residual

-- Carefully constructs and configures the machine/plant. A careful and thorough

acceptance test must then be performed by qualified personnel and the results

-- Implements and validates all the measures required in accordance with the

machine/plant risk analysis by means of the programmed and configured

Safety Integrated functions or by other means.

Depending on the risk assessment of the machine or plant, the safety information

& instructions and residual risks listed in this documentation must also be

assigned, when required, to a hazardous level other than that specified in this

documentation.

The use of Safety Integrated does not replace the risk assessment of the

machine or plant to be performed by the machine manufacturer as specified

in the EC machinery directive!

In addition to Safety Integrated, further risk reduction measures must be

implemented.

As a result of the fault analysis, the machine manufacturer is in a position to define

the residual risk at his machine regarding Safety Integrated. The following residual

risks are known.

SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition

3.5 Safety information & instructions and residual risks

System Features

Sinamics s120