Hotkey Assignment On The Mfii Keyboard; Examples; Configuration Overview - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
5 Configuring OP Hotkeys and PLC Keys

5.9 Hotkey assignment on the MFII keyboard

Hotkey
HK1
HK2
HK3
HK4
HK5
HK6
HK7
HK8
*) The key is on the numerical keypad. NumLock must be OFF.

5.10 Examples

Possible entries for Keys.ini
KEY1.0 = Task:=0
KEY1.1 = Task:=0, State:=0
KEY1.2 = State:=0, Action:=3
KEY1.3 = State:=0, Action:=100

5.11 Configuration overview

Below is a schematic diagram illustrating the associations between configured OP
hotkeys and PLC keys and the Expand user interface configuration.
BE1/5-142
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
OP label
Position
Program
Offset
Prg.Manager
Alarm
Custom
M Machine
Menu Select
Selection of the Machine area in the last
screen the first time the key is pressed
Selection of the Machine area in the start
screen the second time the key is pressed
Selection of the Machine area in the start
screen the third time the key is pressed and
selection of the 3. Softkeys
Selection of the Machine area in the start
screen the fourth time the key is pressed and
selection of the Expand user interface
function with the action configured under 100
in machine.ini
MFII key
SHIFT F11
END (NB)*
Page Down (comment)*
Home (comment)*
Page Up (comment)*
SHIFT F12 or Cursor Down (comment)*
SHIFT F10
F10
© Siemens AG, 2005. All rights reserved
08/2005