Setting Up The Communication - Siemens SINUMERIK 840D sl Configuration Manual

Configuring the NCU

2.4 Setting up the communication

2.4 Setting up the communication
Procedure
To establish a communication connection between two devices, proceed as follows:
1. In the "Online" menu, select the "Accessible devices" command.
2. In the drop-down lists "Type of PG/PC interface" and "PG/PC interface", search for the
interface used.
If no devices are accessible at an interface, the connecting line between the PG/PC and
the device is interrupted. If devices are accessible, the connecting line is shown and the
devices accessible at the selected interface of the PG/PC are displayed in a list.
28
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325