Drilling With Manual Machine - Siemens SINUMERIK Series Operating Manual

Approach and retraction
When machining the workpiece, you traverse from the current position to the machining start
point. After the machining process, the tool is returned along a direct path to the starting point.
16.7.1

Drilling with Manual Machine

Functions (cycles)
The same range of technological functions (cycles) is available as in automatic mode for drilling
on the face or peripheral surface of a workpiece:
Parameter
The parameters of the input screen forms correspond to the parameters under Automatic (see
Section "Drilling (Page 371)").
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
⇒
⇒
⇒
⇒
⇒
Working with Manual Machine
16.7 More complex machining
843