Measuring Workpieces At Lathes: 1-Point Measurement - Siemens SINUMERIK 840D sl Programming Manual

General
1.13 Overview of measuring cycle functions for turning technology
1.13.3

Measuring workpieces at lathes: 1-point measurement

CYCLE974 is used to determine the actual value of the workpiece in the selected measuring
axis with reference to the workpiece zero with 1-point measurement.
1-point measurement, outside or inside
Result:
• Actual dimension: Diameter, length
• Deviation: Tool offset of the zero offset
One-point measurement, outside or inside with 180° spindle reversal
Result:
• Actual dimension: Diameter, length
• Deviation: Tool offset
1-44
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles