Operator Control (Software); Remote Control Of The Control System; Overview Of Remote Control - Siemens SINUMERIK 840D sl Operating Manual

Operator control (software)

6.1

Remote control of the control system

6.1.1

Overview of remote control

With the "remote control" function you can:
● Monitor and operate the control from the PG/PC (remotely).
● Generate screenshots of the control's HMI, and save them to the PG/PC. This enables you
to inform support personnel of errors in the control's HMI via screenshots.
Software option
The "SINUMERIK Integrate Access MyMachine /P2P (PC) (6FC5800-0AP30-0YB0)" option is required for
remote access via TeleService Adapter.
See also
Starting/ending remote control (Page 82)
Using remote control to generate the screen of the control system's HMI user interface
(Page 87)
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
6
77