Compatibility For Cycle Support - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Creating a ShopMill program

9.16 Calling technology functions

VAR_A+2*VAR_B

Compatibility for cycle support

The cycle support is generally upwards compatible. This means that cycle calls in NC programs

can always be recompiled with a higher software version, changed and then run again.

When transferring NC programs to a machine with a lower software version, it cannot be

guaranteed, however, that the program will be able to be changed by recompiling cycle calls.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0