3.2.3
Starting and stopping a spindle manually
Procedure
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Press the "Tool" softkey to open the tool list, position the cursor on the
desired tool and press the "To Manual" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the
field of tool parameter "T".
4.
Select tool edge D or enter the number directly in field "D".
5.
Press the <CYCLE START> key.
The tool is loaded into the spindle.
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Select the desired spindle (e.g. S1) and enter the desired spindle
speed (rpm) in the adjacent input field.
The spindle remains stationary.
4.
If the machine has a gearbox for the spindle, set the gear stage (e.g.
auto).
5.
Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
6.
Press the <CYCLE START> key.
The spindle rotates.
7.
Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Execution in manual mode
3.2 Selecting a tool and spindle
107