Configuring The M Key And Menu Select As Hk7, Hk8 - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Assignment of the softkeys to the action values

Horizontal softkeys SKHi

Vertical softkeys SKVi

ETC key (only for HMI

Configuring the M key and Menu Select as HK7, HK8

The M key (Machine) and Menu Select key can be optionally configured as hotkeys.

This means that these keys lose their original meaning or function. The new

functionality is defined using the Keys.ini configuration file If there is a key

definition in the configuration file for the key, but no response was saved, then the

key does not have a function.

Hotkey assignment:

M key (Machine)

Menu Select (area

If there is no entry in the Keys.ini configuration file for hotkey 7 or hotkey 8, the key

will not be mapped as a hotkey but will retain its original function (compatible

mode). A key definition without a response will be assigned the <empty> attribute.

[KeyConfiguration]

; Activate mapping of the M key to hotkey 7 and set new

; key reaction

Key7.0 = Task:= 3, State := 10

SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition

Expanding the Operator Interface (BE1)

5 Configuring OP Hotkeys and PLC Keys

MF II keyboard

Table of Contents