Configuring The "More Data" Window - Siemens SINUMERIK 840D sl Commissioning Manual

12.2.6

Configuring the "More data" window

<MOREDATACONFIGURATION> tag
The entries used for configuring the "Additional Data" window are located in the
<MOREDATACONFIGURATION> tag. Various data items can be displayed for each tool
type in a number of rows and columns. Each data item to be displayed is specified by
entering a list parameter:
Tool parameter identifiers (Page 143)
Cutting parameter identifiers (Page 145)
Monitoring parameter identifiers (Page 148)
A brief description of the parameter then appears (ShortText), with the value itself beside it.
Configure the list parameters (Page 153).
If another description text is required in the "More Data" window, a text can also be entered
in a row or column. In the window, the width of the text is made to conform to that of the brief
description and value of a parameter.
Any number of rows and columns can be created. A scrollbar appears when the window
reaches a certain size.
Entries
TOOLTYPE_XXX
ROWX_COLY
Item
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Meaning
Number of the tool type.
See example: Tool type 111 = Ball end mill (tapered die-sinking cutter).
Particular rowX_columnY.
If there is no entry after rowX and columnY, this field remains blank.
See example: In the "More Data" window, the first row is blank.
The following entries are possible:
Parameter identifier
•
Text
•
See example:
The header "Corner radius" appears in the second row of the window.
The text "Radius" and an input field for the value appear in the third row of the
window.
The fourth row is blank.
Tool management
12.2 Configuring the user interface
161