Configuring 1:N Connections - Siemens SINUMERIK 840D sl Function Manual

7 Establishing a connection and diagnostics

7.4 Configuring 1:N connections

7.4 Configuring 1:N connections
Configuring connections
Each NCU of a 1:N connection can be selected via a configuration tool and, like a
"standard machine", be connected to a database machine.
The configuration tool is called up automatically during the client installation if
SINUMERIK Integrate recognizes a 1:N configuration.
After installation, one instance of the Machine Handler service is started for each
NCU selected.
Note
Every NCU selected must be connected to a separate database machine.
Fig. 7-24: 1:N configuration
7-322
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2012
03/2012