Swiveling Tool (Cycle800); Swiveling Tool/Preloading Milling Tools - Only For G Code Program (Cycle800) - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

N11 EXTCALL "ROLL"

Swiveling tool (CYCLE800)

After "Swivel plane", the tool orientation is always perpendicular on the machining plane. When

milling with radial cutters, it can make technological sense to set the tool at an angle to the

normal surface vector. In the swivel cycle, the setting angle is generated by an axis rotation

(max. +/- 90 degrees) to the active swivel plane. When setting, the swivel plane is always

"additive". With "Setting tool", only rotations are displayed on the swivel cycle input screen

form. The user can freely select the rotation sequence.

Figure 10-18 The length up to the TCP (Tool Center Point) must be entered as tool length of the radial

Operating Manual, 05/2017, A5E40868956

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Programming technological functions (cycles)

10.6 Further cycles and functions

;Call 5-;axis machining

;program with ;direc-

tion vectors ;(A3, B3,

Sinumerik 840de sl Sinumerik 828d