Creating A Job List - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Managing programs

14.4 Creating a directory / program / job list / program list

Creating a job list

For every workpiece, you can create a job list for extended workpiece selection.

In the job list, you specify instructions for program selection in different channels.

The job list contains the SELECT instructions.

SELECT <program> CH=<channel number> [DISK]

Select the "Program manager" operating area.

Select the desired storage location and position the cursor on the folder

in which you would like to create the file.

Press the "New" and "Any" softkeys.

The "Any New Program" window opens.

Select a file type from the "Type" selection field (for example, "Definitions

GUD") and enter the name of the file to be created when you have se‐

lected a workpiece directory in the NC memory.

The file automatically has the selected file format.

Enter a name and file format for the file to be created (e.g. My_Text.txt).

Press the "OK" softkey.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0