Collision Avoidance - Siemens SINUMERIK 828D Manual

Safety functions

17.2 Collision avoidance

17.2 Collision avoidance
The SINUMERIK Collision Avoidance option provides optimum protection against
unintentional collisions of moving machine components with stationary machine
components.
You can active the collision monitoring in the Machine operating area for the JOG, MDA and
Automatic operating modes.
The Automatic operating mode provides for logging a 3D visualization of the collision
monitoring.
Note
The use of collision monitoring requires the availability of the relevant machine data and the
associated visualization.
Benefit
Collision monitoring also possible for complex machining operations, such as 5-axis
simultaneous milling or turning with B axis
106
SINUMERIK 828D
BASIC
not available
SINUMERIK 840D sl
BASIC
Option: S02
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
SINUMERIK 828D
not available
SINUMERIK 840D sl
Option: S02
SINUMERIK 828D
ADVANCED
not available
SINUMERIK Operate - Milling