Nc/Plc Interface Signals; Signals To Channel (Db21 - Siemens SINUMERIK 840D sl Function Manual

Synchronized actions
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

NC/PLC interface signals

6.1

Signals to channel (DB21, ...)

DB21, ...
Synchronized action off
DBX1.2
Edge evaluation: No
Signal state 1
All synchronized actions in the channel are locked. This means that no synchronized action is exe‐
cuted.
Signal state 0
Synchronized actions are executed in the channel.
References
Function Manual, Synchronized Actions
DB21, ...
Request / acknowledgment: accept synchronized actions to be inhibited / synchronized actions to
DBX280.1
be inhibited are accepted
Edge evaluation: No
Signal state 1
Acceptance of the inhibit signals from the interface in the channel of the NC has been requested by
the PLC user program.
Signal state 0
After the request to accept the inhibit signals from the interface in the channel, the NC acknowledged
the acceptance by resetting the request:
Signal irrelevant for ... DB21, ... DBX1.2 == 1 (all synchronized actions in the channel are inhibited)
Corresponding to ...
Inhibit signals: DB21, ... DBX300.0 - 307.7 (inhibit synchronized action ID/IDS)
References
Function Manual, Synchronized Actions
DB21, ...
Inhibit synchronized action ID/IDS
DBX300.0 - 307.7
Edge evaluation: No
Signal state 1
The synchronized action ID/IDS is inhibited.
Signal state 0
The synchronized action ID/IDS is enabled.
Signal irrelevant for ... DB21, ... DBX1.2 == 1 (all synchronized actions in the channel are inhibited)
Corresponding to ...
DB21, ... DBX280.1 (request / acknowledgment: accept synchronized actions to be inhibited /
synchronized actions to be inhibited are accepted)
References
Function Manual, Synchronized Actions
DB21, ...
Input signal
DBX385.0 ... 7
Edge evaluation: No
Signal state 1
The value of the input signal is 1 (TRUE).
Signal state 0
The value of the input signal is 0 (FALSE).
Corresponding to ...
$AC_IN_KEY_G_ENABLE[1 ... 8]
Synchronized actions
Function Manual, 08/2018, 6FC5397-5BP40-6BA2
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
6
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828dSinumerik 840de sl

Table of Contents