Saving The Dxf File - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.11 Working with DXF files
Delete selected ranges and elements of the DXF file
Delete range
Delete ele‐
ment
6.11.3.6

Saving the DXF file

You can save DXF files that you have reduced and edited.
Requirement
The DXF file is open in the editor.
160
4. Press the "OK" softkey.
The machining section is displayed.
Use the "Cancel" softkey to return to the previous window.
5. Press the "Deselect range" softkey to undo the selection of the machining
range.
The DXF fie is reset to the original display.
6. Press the "Reduce" softkey.
7. Press the "Delete range" softkey to select ranges that you want to delete.
A blue rectangle is displayed.
8. Press the "Range +" softkey to enlarge the section or press the "Range
-" softkey to reduce the section.
9. Press the "Arrow right", "Arrow left", "Arrow up" or "Arrow down" softkey
to move the selection tool.
- OR -
10. Press the "Delete element" softkey and select the element that you want
to delete with the selection tool.
11. Press "OK".
Operating Manual, 05/2017, A5E40868721
Turning