Default Settings For Manual Mode - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Execution in manual mode

5.9 Default settings for manual mode

Default settings for manual mode

Specify the configurations for the manual mode in the "Settings for manual operation" window.

Default settings

Type of feedrate

Setup feedrate G94

Setup feedrate G95

Variable increment

Spindle speed

Here, you select the type of feedrate.

● G94: Axis feedrate/linear feedrate

● G95: Revolutional feedrate

Enter the desired feedrate in mm/min.

Enter the desired feedrate in mm/rev.

For variable increments, enter the desired increment when traversing axes.

Here, enter the desired spindle speed in rpm.

Select the "Machine" operating area.

Press the <JOG> key.

Press the menu forward key and the "Settings" softkey.

The "Settings for manual operation" window is opened.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0